Sutter Professional DECALC Acid Descaling Cleaner – 1Ltr

Features

Acid descaling cleaner specifically for removing limescale deposits from enamelled surfaces, taps, stoneware and ceramics.

In compliance with the following EN Tests standard*: 1276 (Sol. 4%).

Dilution

3% – 5 % (300 ml to 500 ml in 10 L of water) For stubborn deposits on hard surfaces (stoneware, ceramics, concrete) dilute to 10% (1 L every 10 L of water).

How to use

Dilute the product in water to the recommended concentration. Clean the surfaces. Rinse thoroughly.

Warnings

Causes severe skin burns and eye damage. Wear eye protection. IF SWALLOWED: rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. IF IF INHALED: Remove person to fresh air and keep comfortable for breathing. IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician. Contents: FORMIC ACID, 2-PROPYLHEPTANOL ETHOXYLATED PROPOXYLATED.

Note

Do not use on calcareous surfaces (marble, terrazzo, marble composition and travertine, etc.).
Before use, please always refer to the Technical Data Sheet and the Safety Data Sheet, with the exposure scenario, of the product. Use the PPE specified in the Safety Data Sheet.
For further information about the EN Tests & Effectiveness Conditions, please check the “Test and Conditions” Annex.
Sutter Professional cannot be considered liable for any damage due to improper product use.
Only for professional use. Safety data sheet available on request.

* Regulatory requirements surrounding the biocidal registration may vary according to each Country.